Handles latches locks panic bars and other exit devices must comply with ada accessibility standards.
Ada door access requirements.
The ibc requires that doors providing access to areas of refuge be identified by a sign that includes the term area of refuge and the international symbol of accessibility isa.
Of force to open.
Openings more than 24 inches 610 mm deep shall provide a clear opening of 36 inches 915 mm minimum.
Door hardware ada compliant locks exit devices handles pulls latches and other operable parts on doors shall comply operable parts of such hardware shall be 34 inches minimum and 48 inches maximum above the finish floor or ground.
However some older doors are less than 36 inches wide and may not provide enough width 32 inch clear width when fully opened.
4 13 2 revolving doors and turnstiles.
Pulls should provide sufficient knuckle clearance 1 minimum to facilitate gripping.
Sample area of refuge and exit sign.
Door openings can sometimes be enlarged.
Minimum number 206 4 at least 60 of public entrances must be accessible in new construction in addition to entrances directly serving tenancies parking facilities pedestrian tunnels and elevated walkways.
The ada standards do not specify the opening force for exterior doors though some state and local building codes may have requirements.
Doors required to be accessible by 4 1 shall comply with the requirements of 4 13.
Round doorknobs are not ada compliant.
This guide explains scoping and technical requirements for accessible entrances doors and gates in the ada standards.
Revolving doors or turnstiles shall not be the only means of passage at an accessible entrance or along an accessible route.
Interior accessible doors should require no more than 5 lbs.
This applies to interior hinged doors and gates as well as sliding and folding doors.
Both the ibc and the ada standards apply requirements for tactile and visual characters to the area of refuge signs.
Door openings shall provide a clear width of 32 inches 815 mm minimum.
Lever or push mechanism are preferred.
Operable parts for opening and closing the door must be installed between 34 and 48 inches above the floor.
Clear openings of doorways with swinging doors shall be measured between the face of the door and the stop with the door open 90 degrees.
Compartment doors must meet applicable requirements for doors including the clear width 32 min hardware and opening force 5 lbs.